EasyManua.ls Logo

HydroLogic micro75 - Warranty and Support; Product Warranty Details; Technical Support Contact

HydroLogic micro75
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warranty:
A One Year Warranty comes with each unit against manufacturer’s defects. This does not
include clogged filters due to lack of regular maintenance or excessive sediment and/or con
-
taminants in water. This warranty also excludes damage to units caused by using the unit
outside of the specified parameters. Do not operate unit if incoming pressure exceeds 90 psi
or there is problem with water hammer spikes. If unsure of water pressure, check with a pres
-
sure gauge available at your dealer or hardware store. Install the optional pressure regulator
if inlet pressure is above 90 psi.
Do not contact your dealer or distributor for warranty issues.
Contact Hydro-Logic directly.
Tech Support / Contact:
If you have a particular application or setup question, you can call or
email Hydro-Logic:
Support@HydroLogicSystems.com
1-888-H2O-LOGIC
(1-888-426-5644)
Visit us on the web at:
www.HydroLogicSystems.com

Related product manuals