Hydropool Self Clean 970 Titanium - Page 30

30
USING THE APP
On your home network
It is possible to access your spa with the in. touch 2 app through your home network. To be
able to see your in. touch 2 in the applicaon you need to connect your device to the same
router (Wi-Fi network) than the one used to connect your Home Transmier
Go to the Wi-Fi sengs secon of your mobile device and choose the same network that your
spa is connected to (i.e. Home). Once you've selected it, wait unl your device confirms the
connecon.
On the Internet
The in. touch 2 allows you to use the Internet to control your spa from anywhere in the world.
In order for them to communicate, both the in. touch 2 module and your device must be
connected to a network that allows access to the Internet.
Once your Home Transmier is connected to the Internet (the LED status is blue), you can use
your in. touch 2 app any me your device is also connected to the Internet (wireless or cellular
network), even if you are away from home.
To have access to your spa away from home, you will need to have previously linked your
mobile device to your spa on your home network.