37
STANDBY MODE
A press of the SETTINGS key brings you into the menu opons. Use the UP and DOWN arrow keys to highlight
STANDBY. Press the LIGHT key and the following message will appear.
“All pumps off! Press Drain to drain spa”
This mode allows you to stop all outputs including all automac funcons such as a filter cycle, heang requests
and smart winter mode purging for 30 minutes to perform quick spa maintenance.
DRAIN MODE
If you wish to put your spa into “DRAIN MODE” press the FUNCTION key beside the word “Drain” on the display.
Once you do that the display will indicate “Drain in progress”. The filtraon pump will turn on and run for 60
minutes.
In order to exit this mode, press the FUNCTION key beside the back arrow once to exit DRAIN MODE. This will
put you back into STANDBY MODE and if you wish to exit that press the same key to go back to the main screen.
HYDROTHER CONTROL AND WELLNESS THERAPY PACKAGE
This oponal feature allows you to select from eight different therapy packages to help soothe your aches and
pains or focus on key parts of your body that need some aenon. In order to select the therapy you are looking
for please reference the “Wellness Guide” that came with your hot tub and follow the instrucons below.
PROGRAMMING THE HYDROTHER / WELLNESS THERAPY
From the main display page, press the WELLNESS icon to navigate into the submenu. From there you will see the first
selecon page which offers your four oponal therapy packages (Leg Pain, Back Pain, Diet Acvaon, Sport Recovery). If you
wish to select one of these packages simply press the text descripon you are looking for. If not, scroll through the menu to go
to the second page which offers you another four oponal therapy package (Headache Relief, Insomnia Relief, Stress Relief,
Tonic Awakening). Press the text descripon you are looking for.