58
CRACKS AND CUTS
Check if
1) there are visible cracks and cuts.
2) there are pebbles stuck.
Operating the motorcycle with excessively
worn tire will decrease riding stability and
can lead to loss of control.
Inspect storage of tire thread’s depth by
the tire wear indicator.
Replace the front and rear tires at once
when appear the tire wear indicator.
REAR AXLE NUT
Inspect the rear axle shaft and jointing nut
for loosening.
TIRE TREAD CONDITION
Tire wear
indicator
Tire wear
indicator mark
The standard tire on is
130/80-18M/C 66P for front and
180/80-14M/C 78P for rear.
The use of a tire other than standard
may cause trouble.
It is highly recommended to use the
standard tire supplied by Hyosung.
CAUTION
SCREW,
FOREIGN
MATERIAL
WORN,
CRACK
ABNORMAL
WEARS
To Next Page
Loading...
