Hypercom T7 series - Page 24

Equipment Information
940114-020 Hypercom Point-of-Sale 1-7
(IPIXMRK6IZIVWEPW&EXGLERH-RMXMEPM^EXMSREX
%TTPMGEXMSR0IZIP
While in Function 99, 9, you can delete any one or all of the following parameters:
n
Reversals (6)
n
Batch (2)
n
Initialization (1)
Before loading a new application into a terminal you must delete all Reversals, Batch, and
Initialization at Application level.
Step-by-Step
To delete Reversals, Batches, and Initialization:
Step Action Terminal display
The terminal displays the Idle prompt. '$7( 7,0(
6:,3(&86720(5&$5'
1 Press the key sequence: Function, 9, 9, Enter.The
terminal displays the following message.
0(5&+$17)81&7,21

2 Type the password, 028510, and press Enter
. (17(53$66:25'

3 Press the key sequence: 9, Enter. 352*5$0)81&7,21

4 To delete reversals, press the key sequence: 6,
Enter.
N
OTE: Reversals are incomplete transactions. If
the terminal receives ND messages during
settlement, complete steps one through
four to fix the problem.
7<3("

5 Press Cancel to return to the Idle prompt or
proceed with the next Step.
7<3("
75$16$&7,21&203/(7('
6 To delete batches, press the key sequence: 2,
Enter.
7<3("
