Hypercom T7 series - Page 30

Equipment Information
940114-020 Hypercom Point-of-Sale 1-13
7GVIIR
Step-by-Step
To download the terminal with software.
EPROM version Terminal display
If the EPROM is 2.00 or higher, the terminal
displays the following message.
NOTE: PE means Program Error, indicating the
terminal has no software.
3/($6(,1,7,$/,=(
25&$//+(/33(
Step Action Terminal display
1 Press the key sequence: Function, 2, Enter. 0(5&+$17)81&7,21

2 Type the password and press Enter. The default
password is 0000.
0(5&+352*
(17(53$66:25'
3 Type the terminal ID and press Enter. 7(50,1$/,'180%(5
;;;;;;;;;
4 Type the INIT phone number and press Enter. The
INIT phone number is the number the terminal
dials for initializations.
,1,77(/(3+21(12
;;;;;;
5 Type the NMS phone number and press Enter.
The NMS phone number is the number the
terminal dials for software downloads.
1067(/(3+21(12
;;;;;;
6 Type the number corresponding to the desired
dial mode and press Enter.
',$/721( 38/6(

7 If needed, type a PABX access code and press
Enter. For example, type 9 if needed prior to
dialing out. To disable call waiting, type 1170 in
this field.
N
OTE: To bypass this field, press Enter.
3$%;$&&(66&2'(
8 Press Cancel to exit the menu. (;,735(66µ&$1&(/¶
If the terminal has an EPROM of less than 2.00,
the following message appears.
N
OTE: PE means Program Error, indicating the
terminal has no software.
&21),*85(7(50,1$/
25&$//+(/33(