Hypercom T7 series - Page 36

Equipment Information
940114-020 Hypercom Point-of-Sale 1-19
5 Press Enter until the terminal scrolls to the Options
Bit settings.
n
01=Standard terminal setting
n
05=Visanet or CES
237,216

6 Press 01 or 05 and Enter or press Enter to bypass
this field.
237,216
 ;;
7 Press Enter until the terminal scrolls to the Hook
Delay settings.
The Hook Delay default setting is 01. Set to 00, if
attaching a portable cellular phone to the
terminal.
+22.'(/$<

8 Press 00 or 01, and Enter or press Enter to bypass
this field.
+22.'(/$<
 ;;
9 Press Enter until the terminal scrolls to the Printer
setting.
The terminal displays the current Printer settings
on terminals with EPROM versions 2.00 or higher.
n00=T7E
n
01=T7P
n
06=T77F
n
07=T77S
n0A=T7P Thermal
n 0B=T77T
Select the appropriate Printer setting and press
Enter or press Enter to bypass this field.
35,17(5
;;
10 Press Cancel to exit the menu screen.
If the software application has been deleted from
Boot level, the terminal displays the following
message.
3/($6(,1,7,$/,=(
25&$//+(/33(
If you have existing software, press Function 3,
Enter. The terminal displays the following
message.
3/($6(,1,7,$/,=(
25&$//+(/3)(
Step Action Terminal display