Hypertherm Duramax Series - Machine Torch Setup

TORCH SETUP
Duramax Retrofit Torch Operator Manual 2-5
Machine torch setup
Duramax MRT
2
Before using either style of machine torch, you must:
• Mount the torch on your cutting table or other equipment.
• Choose and install the consumables.
• Align the torch.
• Attach the torch lead to the power supply.
• Set up the power supply for remote starting with either the remote-start pendant or a machine interface cable.
Consumables
Mounting
sleeve
Coupler
Strain relief
body
Strain relief
nut
Torch lead
Consumables
Mounting
sleeve
Coupler
Gear rack
Strain relief
body
Strain relief nut
Main strain
relief nut
Torch lead
Positioning sleeve
Duramax MRT
2
without positioning sleeve (mini torch)