Hypertherm Powermax 1000 User Manual

 Safety First
 The Equipment -- PlasmaCAM Table
 The PlasmaCAM Software
 The Equipment -- Hypertherm Powermax 1000
 Bringing it all together
 Other information
Agenda

Hypertherm Powermax 1000 Specifications

General

Open Circuit Voltage (OCV)	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Cut Capacity (Maximum)	1 in (25 mm)
Pierce Capacity	1/2" (13 mm) on mild steel
Gas Type	Air or Nitrogen