Need help?Do you have a question about the Hypertherm Powermax 125 and is the answer not in the manual?
General| Output Current | 30-125 A |
|---|---|
| Input Power | 15.2 kW |
| Open Circuit Voltage | 300 VDC |
| Gas Supply | Clean, dry, oil-free air or nitrogen |
| Input Power Cable Length | 10 ft (3 m) |
| Rated Output Current | 125 A |
| Gas Type | Air or nitrogen |
| Cutting Capacity | 1-1/4 inch (32 mm) |
| Pierce Capacity | 1 inch (25 mm) |
| Input Voltage | 200-600 V, 3-PH |
| Duty Cycle | 100% @ 125 A |
| Certifications | CSA |
| Maximum Clean Cut Thickness | 1-1/4 inch (32 mm) |
| Cooling Method | Fan-cooled |
| Torch Options | Hand |
To Next Page
