Hypertherm Powermax 125 Service Manual

Powermax125 Service Manual 808070 21
1 – Specifications
Component weights (125 A systems)
Table 1 – Power supply weights
Table 2 – Torch weights
Table 3 – Work lead weights
Voltage 480 V CSA 600 V CSA 400 V CE
380 V CCC
(no power cord)
Power supply 41 kg
(90 pounds)
40 kg
(89 pounds)
42 kg
(92 pounds)
38 kg
(84 pounds)
With 7.6 m (25 foot) hand
torch and 7.6 m (25 foot)
work lead
48 kg
(106 pounds)
48 kg
(105 pounds)
49 kg
(108 pounds)
45 kg
(100 pounds)
Hand torch 7.6 m (25 feet) 3.5 kg (7.7 pounds)
Hand torch 15 m (50 feet) 6.2 kg (13.7 pounds)
Hand torch 23 m (75 feet) 8.8 kg (19.5 pounds)
Machine torch 7.6 m (25 feet) 3.7 kg (8.2 pounds)
Machine torch 11 m (35 feet) 4.8 kg (10.6 pounds)
Machine torch 15 m (50 feet) 6.4 kg (14.2 pounds)
Machine torch 23 m (75 feet) 9.2 kg (20.3 pounds)
Work lead 7.6 m (25 feet) 3.6 kg (8 pounds)
Work lead 15 m (50 feet) 6.6 kg (14.6 pounds)
Work lead 23 m (75 feet) 9.6 kg (21.2 pounds)

Hypertherm Powermax 125 Specifications

General

Output Current	30-125 A
Input Power	15.2 kW
Open Circuit Voltage	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Input Power Cable Length	10 ft (3 m)
Rated Output Current	125 A
Gas Type	Air or nitrogen
Cutting Capacity	1-1/4 inch (32 mm)
Pierce Capacity	1 inch (25 mm)
Input Voltage	200-600 V, 3-PH
Duty Cycle	100% @ 125 A
Certifications	CSA
Maximum Clean Cut Thickness	1-1/4 inch (32 mm)
Cooling Method	Fan-cooled
Torch Options	Hand