Hypertherm Powermax 125 Service Manual

Powermax125 Service Manual 808070 307
11 – Parts
FineCut
Accessory parts
Part Number Description
420152 Duramax Hyamp FineCut shield
220977 Duramax Hyamp retaining cap
420156 Duramax Hyamp Ohmic retaining cap
420151 Duramax Hyamp FineCut nozzle
220971 Duramax Hyamp electrode
220997 Duramax Hyamp swirl ring
Part Number Description
024548 Brown leather torch sheathing, 7.6 m (25 foot)
024877 Black leather torch sheathing with Hypertherm logo, 7.6 m (25 foot)
127360 Powermax105/125 dust cover
228890 Kit: Eliminizer gas filter with protective metal cover for the Powermax105/125
101215 Kit: Eliminizer gas filter protective metal cover for the Powermax105/125 (cover only)
223292 Kit: 125 A work lead with hand clamp, 7.6 m (25 feet)
223293 Kit: 125 A work lead with hand clamp, 15 m (50 feet)
223294 Kit: 125 A work lead with hand clamp, 23 m (75 feet)
223298 Kit: 125 A work lead with C-style clamp, 7.6 m (25 feet)
223299 Kit: 125 A work lead with C-style clamp, 15 m (50 feet)
223300 Kit: 125 A work lead with C-style clamp, 23 m (75 feet)
223295 Kit: 125 A work lead with ring terminal, 7.6 m (25 feet)
223296 Kit: 125 A work lead with ring terminal, 15 m (50 feet)
223297 Kit: 125 A work lead with ring terminal, 23 m (75 feet)
008539 Ground hand clamp: 500 A
229467 Kit: Powermax105/125 wheel kit assembly
229570 Kit: Powermax105/125 gantry mount frame

Hypertherm Powermax 125 Specifications

General

Output Current	30-125 A
Input Power	15.2 kW
Open Circuit Voltage	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Input Power Cable Length	10 ft (3 m)
Rated Output Current	125 A
Gas Type	Air or nitrogen
Cutting Capacity	1-1/4 inch (32 mm)
Pierce Capacity	1 inch (25 mm)
Input Voltage	200-600 V, 3-PH
Duty Cycle	100% @ 125 A
Certifications	CSA
Maximum Clean Cut Thickness	1-1/4 inch (32 mm)
Cooling Method	Fan-cooled
Torch Options	Hand