Powermax30 XP/45/45 XP/65/85/105/125 Field Service Bulletin 809610 3
Optional Oil Removal Air Filter Kit and Element Replacement
Introduction
Purpose
This Field Service Bulletin describes how to install the optional Oil Removal Air Filter Kit (428719) and replace
the oil removal filter element (428720) on the Powermax30 XP, Powermax45/45 XP, Powermax65/85, and
Powermax105/125. This filter is also recommended for use with older Powermax systems.
This document also includes instructions to install the optional Eliminizer Moisture Removal Filter (not included
in kit 428719) with the Oil Removal Filter.
Optional air filters
Powermax gas specifications call for the use of clean, dry, and oil-free air. The best defense against gas line
contamination is to keep the air compressor in good working condition. If work site conditions introduce
excess oil or humidity, use additional air filtration.
The optional Oil Removal Air Filter Kit (428719) removes oil, oil vapor, and dirt from the gas supply.
The optional Moisture Removal Air Filter Kit (128647, not included) removes water and dirt from the gas supply.
External air filters may increase the required minimum inlet pressure.
WARNING!
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance.
All work requiring removal of the power supply cover must be performed by
a qualified technician.
See the safety information provided with your product for more safety
precautions.
To Next Page
Loading...
Need help?
General
