HyperX Pulsefire Haste Wireless User Manual

Document No. 4P5D#AA.A01
HyperX Pulsefire Haste Wireless
Page 5 of 8
Installation
Wireless Mode
For optimal performance, please use the provided wireless adapter and keep within 20cm of
the mouse. These instructions apply both for Computers and Game Consoles (PlayStation 5
and Xbox Series X|S).
1. Connect the wireless receiver to the wireless adapter.
2. Connect the USB-C connector to the wireless adapter.
3. Connect the USB-A connector to the computer or game console.
4. Flip the mouse to its underside.
5. Move the power switch to the “On” position. A green colored indicator should be visible.

HyperX Pulsefire Haste Wireless Specifications

General

Sensor	Pixart PAW3335
DPI	Up to 16000 DPI
DPI Presets	400 / 800 / 1600 / 3200 DPI
Speed	450 IPS
Acceleration	40G
Wireless Type	2.4 GHz
Battery Life	Up to 100 hours
Buttons	6
Charging Type	USB-C
Weight	61g
Polling Rate	1000 Hz
Cable Length	1.8m
RGB Lighting	Yes
Connectivity	Wireless
Grip Style	Claw, Fingertip, Palm
Switch Type	TTC Golden Micro Dustproof Switch
Switch Durability	80 Million Clicks
Dimensions	124.3mm x 66.8mm x 38.2mm