Hypontech HHT-5000 Series User Manual

HHT-5000/6000/8000/10000/12000 USER MANUAL 6
6. The DC input voltage of the PV array MUST never exceed the maximum input
voltage of the inverter.
7. DO NOT touch parts of the inverter during operation as heat will be induced and
these parts will exceed 60℃.
8. There are installations where multiple inverter energy systems are used and electrical
installation connects at 3-phase points of supply to the grid, please refer to the
requirements of Appendix B.
9. Safe Transport / Handling:
- Find the mark of PLACE UPWARDS on the inverter container and keep it upward.
- The inverter container should be tied or fixed during transportation.
- The transport of the inverter requires two people for lifting, there is one handle on
the left and one on the right.
- The inverter should be protected from heavy vibrations and shocks during
transportation.
10. Compatible Battery Models
Brand
Model
Pylontech
Force-H1
Force-H2
Powercube X1
Powercube X2
Powercube H1
Powercube H2
Dyness
Tower T10/T14/
4. UNPACKING
3.1 Scope of Delivery
Please inspect and check for completeness in the scope of delivery. Confirm with
purchase order.

Hypontech HHT-5000 Series Specifications

General

Brand	Hypontech
Model	HHT-5000 Series
Category	Inverter
Language	English