User Manual 20
6. 6 COMMUNICATION
6.1 System monitoring via Datalogger - RS485/Wi-Fi /GPRS
(Optional)
Wi-Fi /GPRS Datalogger Installation
1. Unpack the Datalogger from package.
2. Unscrew the cap in COM1 port and plug the Datalogger in and tighten.
3. For user guidance and configuration of Datalogger, please refer to the
corresponding HYPONTECH Wi-Fi Stick Guide manual, which is available in
printed form inside Documents pack, or an online manual on HYPONTECH
website at https://www.hypontech.com/xiazai
To Next Page
Loading...
Need help?
General
