Hyster H50XT - Carriages Repair, Two-Stage LFL Mast; Standard Carriage Removal

Figure 8. Fork Checks
Legend for Figure 8
A. HEEL OF FORK (MUST BE 90% OF DIMEN-
SION B)
B. ORIGINAL FORK THICKNESS (DIMENSION B)
1. TIP ALIGNMENT (MUST BE WITHIN 3% OF
FORK LENGTH)
2. CRACKS
3. MAXIMUM ANGLE 93°
4. FORK REMOVAL NOTCH
5. CARRIAGE
Carriages Repair, Two-Stage LFL Mast
STANDARD CARRIAGE
Remove
1.
Remove forks. See Fork Replacement section
for procedures.
2.
Remove four capscrews and load backrest from
carriage. See Figure 9.
3.
Connect a lifting device to the carriage. Lift car-
riage so that lift chains become loose.
1. CAPSCREW
2. WASHER
3. NUT
4. CARRIAGE
5. LOAD BACKREST
Figure 9. Load Backrest, Remove
4000 SRM 1999 Carriages Repair, Two-Stage LFL Mast
11