Hytera DMR User Manual

11
Receiving and Responding to a Call
Receiving and Responding to a Call
Receiving a Call
When a call is received, your radio will display the
corresponding icon as follows:
 
for a Private Call,


for a Group Call and

for an All Call.
Responding to a Private/Group Call
After a Private Call or Group Call is received, you may
press the PTT key within the preset time period to call
back.
If you do not respond to a received Private Call, the radio
will display the missed call icon
.
Calls on Analog Channels
Calls on Analog Channels
To transmit on an analog channel, hold down the PTT and
speak into the microphone. To receive, release the PTT.
Transmitting a Group Call
Transmitting a Group Call
You may transmit a Group Call through any of the
following methods. When transmitting a Group Call, the
icon

will appear.
Transmitting a call to the preset contact
In standby mode, pressing PTT will transmit a Group Call
to the contact (a Group Call number) preset for the current
channel.
Transmitting a call through Contact List
1) Go to Contact -> Contact List.
2) Use the Up/Down key to select the Group Call
number you want to call.
3) Hold down PTT to transmit a Group Call to the
selected contact.
Transmitting an All Call
Transmitting an All Call
Methods are the same as those in Transmitting a Group
Call. When transmitting an All Call, the icon
 
will
appear.
4UZK ?U[IGTZXGTYSOZGT'RR)GRRUTR_]NKTOZOY
KTGHRKJH__U[XJKGRKX
4UZK ?U[IGTTUZXKYVUTJZUGT'RR)GRR
4UZK :UKTY[XKGTUVZOSGR\UR[SKLUXZNK
XKIKO\OTMXGJOUNURJZNKXGJOUGVVXU^OSGZKR_
ZUIKTZOSKZKXYG]G_LXUS_U[XSU[ZN J[XOTM
ZXGTYSOYYOUT
Call
Call

Hytera DMR Specifications

General

Brand	Hytera
Model	DMR
Category	Radio
Language	English