Introduction User Manual
8
No. Item
Specifications
Downlink Uplink
band edge
16
Intermodulation
Attenuation
In-band
≤–40 dBc@RBW3 kHz
8 CH 75 kHz Carrier Spacing
≤–45 dBc@RBW3 kHz
2 CH 75 kHz Carrier Spacing
Out-of-band (2.5
MHz away from the
band edge)
≤–36 dBm/100 kHz@9 kHz to 1 GHz
≤–30 dBm/1 MHz@1 GHz to 12.75 GHz
17 Out-of-band Rejection (–6 dB)
≤–20 dBc@±50 kHz
≤–25 dBc@±75 kHz
≤–30 dBc@±125 kHz
≤–63 dBc@±250 kHz
≤–67 dBc@±500 kHz
18 Optical Bypass (optional)
When the remote unit is powered down or the optical
path is faulty, the optical path is automatically bypassed,
and other cascaded remote units are not affected.
19 Optical Loop
When the remote unit is powered down or the optical
path is interrupted, other cascaded devices can work
normally through the loop.
20 Network Topology Star, Chain, Ring, Hybrid and etc.
21 Optical Transmission Distance ≥20 km
22 Transmission Rate 1.25 GB/s, 2.5 GB/s, 3.02 GB/s, 6.04 GB/s (optional)
23 Optical TX Power –9.5 dBm to –3 dBm
24 Max. Optical RX Sensitivity –20 dBm
25 RF Connector N/F, 50 Ω
To Next Page
