Hytera DS-9300 - 3.6 LED Indicators

Getting Started User Manual
16
Pin No. Signal Name Definition Remarks
4 GND Ground /
LOC
Pin No. Signal Name Definition Remarks
1 TX Data transmission Output.
2 RX Data receiving Input.
5 GND Ground /
3.6 LED Indicators
The LED indicators on the donor and the remote units indicate the running status.
LED
Indicator
Color Status Description
ALM/VSWR Red
Off The device is running well.
Glowing or flashing The device malfunctions.
COM Green
Glowing Remote communication works well.
Off Remote communication error.
PWR Green
Glowing The device is properly powered.
Flashing or off The device is not properly powered.
RUN Green
Flashing The device runs properly.
Glowing or off The device malfunctions.
CPRI 0 Green
Glowing Optical synchronization works well.
Flashing or off Optical synchronization error.
CPRI 1 Green
Glowing Optical synchronization works well.
Flashing or off Optical synchronization error.
CPRI 2 Green
Glowing Optical synchronization works well.
Flashing or off Optical synchronization error.
CPRI 3 Green Glowing Optical synchronization works well.