EasyManuals Logo

Hytera HM785 User Manual

Hytera HM785
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
21
With the Keypad Mode feature enabled by your dealer, go to Menu > Settings > Basic Settings > Keypad Mode,
and then select On. On the home screen, enter the private ID, select Private ID, and then press and hold the PTT
key.
The private ID must be complied with the dialing rules. For details, consult your dealer.
Through Call Logs
Go to Menu > Call Logs, and then select the private call record.
Press and hold the PTT key.
Through One Touch Call/Menu
With the One Touch Call/Menu feature enabled, press the preprogrammed One Touch Call/Menu key, and then press
and hold the PTT key.
6.2.1.2 Trunking Mode
Through Preset Contact
Press and then rotate the Smart knob to select the private contact.
Press the PTT key.
Through Contact List
Do either of the following:
Press the Back/Subgroup key or the preprogrammed Current Subgroup Contact or Contact List key.
Go to Menu > Contact > Favorite/Private.
Select the private contact.
Press the P5/Answer key on the radio, or press the Answer key or the PTT key on the palm microphone.
Through Manual Dialing
On the home screen, enter the private ID through the keypad on the palm microphone.
Do either of the following:
Press the P5/Answer key on the radio.
Press the Answer key, , or the PTT key on the palm microphone.
The private ID must be complied with the dialing rules. For details, consult your dealer.
Through Call Logs
Do one of the following:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hytera HM785 and is the answer not in the manual?

Hytera HM785 Specifications

General IconGeneral
Channel Capacity1024
Operating Voltage13.6 V ± 15%
GPSYes
BluetoothYes
Channel Spacing12.5/20/25 kHz
Operating Temperature-30°C to +60°C
Frequency Stability±0.5 ppm
Antenna Impedance50 Ω
Modulation Limiting±2.5 kHz @ 12.5 kHz; ±4.0 kHz @ 20 kHz; ±5.0 kHz @ 25 kHz
Audio Distortion≤3%
Intermodulation≥65dB
Spurious Response Rejection≥70dB
IP RatingIP54
Frequency RangeUHF: 400-527MHz
Display2.4-inch
Digital ProtocolDMR
FM Hum & Noise≥40dB
Adjacent Channel Power≥60dB
Audio Response+1~-3dB
Conducted & Radiated Emission-36dBm <1GHz; -30dBm >1GHz
Adjacent Channel Selectivity≥60dB
Zone Capacity64 (each with a maximum of 256 channels)
Sensitivity (Analog)0.22 μV (12 dB SINAD)

Related product manuals