45
8.5.3 Viewing the Position
8.5.3.1 Viewing the Local Position
Go to the Menu > GPS > Position, and then press the OK/Menu key to view the position information of your radio
(including longitude, latitude, time, date, and the number of satellites).
8.5.3.2 Viewing the Contact Position
In conventional mode, go to Menu > GPS > Query Location, and then press the OK/Menu key to view the
location information of a nearby private contact (including alias, direction, and distance).
In trunking mode, go to Menu > GPS > Query Neighbors, and then press the OK/Menu key to view the
location information of a nearby private or group contact (including alias, direction, and distance).
8.5.4 Sending a Position Message
In conventional mode, you can send a position message to a contact. Do as follows:
1.
Go to Menu > GPS > Position > GPS Msg.
2.
Press the OK/Menu key to enter the contact list, and then select the contact.
3.
Press the OK/Menu key to send the message to the contact.
In trunking mode, you can send a position message to the dispatch station. Do as follows:
1.
Go to Menu > GPS > Msg with Position.
2.
Press the OK/Menu key to edit the message.
3.
Press the OK/Menu key to send the message.
8.5.5 Call Location
During a call, if the transmitting radio is enabled with the Call Location feature, the receiving radio displays the
location information of the transmitting radio when receiving valid positioning data.
8.5.5.1 Voice w/Location
The Voice w/Location feature allows the radio to report its location information when initiating a private call, a
group call, or an emergency call.
Go to Menu > GPS > Call Location > Voice w/Location, and then press the OK/Menu key to enable the feature.
8.5.5.2 Display Call Location
If the transmitting radio is enabled with the Voice w/Location feature and the receiving radio is enabled with the
Display Call Location feature, the receiving radio displays the location information of the transmitting radio during
To Next Page
Loading...
Need help?
General
