You can adapt your radio to use the TK, SK1,
SK2, P1, and P2 as shortcuts to various radio
features by requesting your dealer to program
the keys. For the detailed introduction, refer to
the corresponding Feature Book included with
the product.
LCD Icon
Icon Radio Status
The dual-tone multi-frequency signaling
(DTMF) keypad is enabled.
The GPS feature is enabled, and the radio
receives GPS data.
The GPS feature is enabled, but the radio
receives no GPS data.
The number of bars (0–3) indicates the
charge remaining in the battery.
The radio is set at Low power.
The radio is set at High power.
Icon Radio Status
An accessory is connected.
One or more new work orders are received.
The maximum number of saved work orders
is reached.
DM
Direct Mode: In this mode, radios
communicate with each other directly.
RM
Repeater Mode: In this mode, radios
communicate with each other via a repeater.
The Monitor feature is enabled.
The radio is in emergency mode (excluding
silent emergency mode) or an emergency
call is received.
The radio is roaming.
The Scrambler or Encrypt feature is
enabled.
The radio is scanning.
The radio stays on a non-priority channel.
Icon Radio Status
The radio stays on priority channel 1.
The radio stays on priority channel 2.
The Voice Operated Transmit (VOX)
feature is enabled.
There is/are missed call(s).
There is/are unread message(s).
The Inbox is full.
The BT feature is enabled.
The wireless device is connected.
There is no signal.
The number of bars (1–4) indicates the radio
signal strength.
The speaker is unmuted.
3
To Next Page
Loading...
Need help?
General
