Hytera PDC7 Series User Manual

Configuration Guide
Feature Configuration
39
Path: Common -> PMR Setting -> Call Permission -> Initiate Private Call
4.2.4.2 Group Call
To initiate group call, the Initiate Group Call must be set to Allow.
Path: Common -> PMR Setting -> Call Permission -> Initiate Group Call
4.2.4.3 All Call
To initiate all call, the Initiate All Call must be set to Allow.
Path: Common -> PMR Setting -> Call Permission -> Initiate All Call
4.2.4.4 Digital Emergency
To use the feature, you should configure the following parameters and set the emergency key.
Path:
1. Conventional -> Service -> Digital Emergency -> Emergency Setting -> Emergency Type
2. Conventional -> Service -> Digital Emergency -> Call to Follw -> Call to Follw
Note
 The Emergency Type must be set to Regular.
 The Group Call Call ID is the target ID of the emergency call.
 Select the channel for emergency call in Revert Channel.
 When Call To Follow is enabled, the radio automatically transmits voice in emergency call without
PTT press.
3. Conventional -> Zone and Channel -> Digital Channel -> Service -> Emergency System

Hytera PDC7 Series Specifications

General

Brand	Hytera
Model	PDC7 Series
Category	Radio
Language	English