Hardware Encryption (for PDT radios only)
To use this feature, you need to complete the following configurations.
Authorize E2EE to radio through Smart MDM
Configure E2EE through Smart MDM
Insert the encryption card into the radio
The radio supports SD encryption card and SIM encryption card, which needs customized development. The
slots of SD card and SIM card in the radio are as below.
This chapter describes how to configure E2EE only. See 7 Paid Feature License to authorize the radio.
Path:
1. Conventional -> General Setting -> Digital -> Encryption -> Encryption, Encryption Type, Encryption
Service
2. Conventional -> Zone and Channel -> Digital Channel -> Encryption -> Encryption, Encryption Type,
Encryption Key
To Next Page
Loading...
Need help?
General
