Hytera PDC7 Series User Manual

Configuration Guide
Feature Configuration
59
4.3.2.3 TSCC
The radio supports fixed TSCC and flexible TSCC hunt plans to quickly register to the base station.
The radio performs the following hunt plans when powering on, re-registering or no signal is searched.
 Fixed TSCC Hunt: only short hunt is available in this version. The radio successively hunts the last 10
registered channels, channel list of the adjacent base stations and fixed TSCC list, until it successfully registers
to a base station.
 Flexible TSCC Hunt: the radio successively hunts the last 10 registered channels, channel list of the adjacent
base stations and flexible TSCC list, until it successfully registers to a base station.
Path:
1. Trunking -> General Setting -> Hunt -> Common Hunt Parameter -> TSCC Hunt Plan
Note
Generally, the TSCC Hunt Plan should be set to Fixed TSCC.
2. Trunking -> General Setting -> Hunt -> Fixed TSCC Parameter -> RX Base Frequency, TX Base
Frequency, Control Channel Spacing, Channel Offset Value (for PDT radios only)

Hytera PDC7 Series Specifications

General

Brand	Hytera
Model	PDC7 Series
Category	Radio
Language	English