19
3.1.2.1 Initiating a Private Call
Through Manual Dialing
1.
Tap .
2. On the dialpad, enter the private ID.
3.
Tap .
4.
Press and hold the PTT key.
Through Contact List
1. Tap or .
2. Go to Contacts > Favorites/Private.
3. Do either of the following:
Tap the private contact, and then press and hold the PTT key.
In the contact details interface, tap .
Through One Touch Call
With the One Touch Call feature enabled, press the preprogrammed One touch call/msg key.
3.1.2.2 Receiving a Private Call
DMO
You can answer a private call without any operation.
TMO
You can answer a private call according to its signaling, which is configured by your dealer.
When receiving a private call with Hook signaling, the radio rings and vibrates. You can press the PTT
key to answer the call.
When receiving a private call with Direct signaling, you can answer it without any operation.
3.1.2.3 Managing a Private Call
During a private call, the calling party can perform the following operations:
To turn on the speaker during a full-duplex call, tap
.
To record the call, tap
.
To Next Page
