Hytera PTC760 - DGNA (TMO Only)

22
3.1.5.1 Initiating a PSTN/PABX Call
Through Contact List
1. Tap or .
2. Go to Contacts > Favorites/Private.
3. Tap the PSTN/PABX contact in the contact list.
4. Press the PTT key.
Through Manual Dialing
1. Tap .
2. On the dialpad, enter the PSTN/PABX ID.
3. Tap
.
4. In the Choose Call Way dialog box, tap PSTN or PABX.
5. Press the PTT key.
Through One Touch Call
With the One Touch Call feature enabled, press the preprogrammed One touch call/msg key.
3.1.5.2 Receiving a PSTN/PABX Call
To answer a PSTN/PABX call, press the Back/Answer or PTT key.
3.1.5.3 Ending a PSTN/PABX Call
A PSTN/PABX call ends when the calling or called party taps or presses the On-Off/End key.
3.1.6 DGNA (TMO Only)
The Dynamic Group Number Assignment (DGNA) feature allows you to initiate a call to or receive a call
from a dynamic group temporarily created by a dispatch station. After accepting the dynamic group
participation request, you can view the group on the radio. After the dynamic group is dismissed, you
cannot view the group on the radio.
For operations of initiating, receiving, or ending a DGNA call, see 3.1.1 Group Call.