EasyManua.ls Logo

Hytera PTC760 - Call Settings and Emergency

Hytera PTC760
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
In DMO, you can set the maximum TX power to 1.8W (32.5dBm), 1W (30dBm), 0.56W (27.5dBm), 0.3W
(25dBm), or 0.18W (22.5dBm).
In TMO, you can set the maximum TX power to 1.8W (32.5dBm), 1W (30dBm), or 0.56W (27.5dBm).
5.7 E2EE
With the End-to-End Encryption (E2EE) feature enabled, voice and data are well protected against
eavesdropping to ensure communication privacy.
If the radio is configured with this feature, you can enable it in any of the following ways:
Tap the control widget of E2EE.
Press the preprogrammed E2EE key.
Tap
, and then tap E2EE.
5.8 Call Settings
Call Settings allows you to configure the features about calls.
5.8.1 Soft PTT Key
With the Soft PTT Key feature enabled, the call interface displays the virtual PTT button.
To enable or disable this feature, tap
, and then tap Soft PTT Key.
5.8.2 Call Recording
The Call Recording feature allows you to record all calls. The recordings are automatically saved in the
Recorder app.
To record a PMR call, tap
in the call interface.
To record all PMR calls, tap
, and then enable Call Recording.
5.8.3 Speed Dial
1. Tap
2. Tap Speed Dial.
3. Link the numbers (1–9) with contacts.
4.
Tap
.

Table of Contents