Hytera PTC760 - Displaying Battery Power; Enabling Battery Saver; Changing Battery Work Type

54
7.6.2 Displaying Battery Power
To show the remaining battery power on the main screen, do as follows:
1. Tap
.
2. Under the Device pane, tap Battery.
3. Enable Battery percentage.
7.6.3 Enabling Battery Saver
The battery saver allows the radio to reduce power consumption by lowering the screen brightness,
adjusting the sleep time, and so on.
To manually enable the battery saver, do either of the following:

In the control and notification center, tap the control widget of Battery Saver.

Tap
, tap Battery under the Device pane, and then tap Battery saver.
To allow the radio to enable the battery saver automatically, do as follows:
1. Tap
.
2. Under the Device pane, tap Battery.
3. Tap Battery saver.
4. Tap Turn on automatically.
5. Select Never, at 5% battery, or at 15% battery.
7.6.4 Changing Battery Work Type
The battery work types include standard, phone, and radio.

Standard: The radio enables both the narrowband and broadband networks.

Phone: The radio enables only the broadband network.

Radio: The radio enables only the narrowband network.
To change the battery work type, tap
, tap Battery under the Device pane, and then tap Work type.