35
4.4.2 Setting the WLAN Network
In the WLAN interface, tap , and then do any of the following:
View the MAC address and IP address of the radio.
To check or delete saved networks, tap Saved networks.
To receive a notification when a WLAN network is available, enable Network notification.
To set the WLAN connection status when the main screen is off, do one of the following:
Tap Always.
The radio is always connected to the WLAN network.
Tap Only when plugged in.
The radio is connected to the WLAN network only when being charged.
Tap Never.
The radio is not connected to the WLAN.
4.5 Tethering and Portable Hotspot
The Tethering & Portable Hotspot service allows the radio to share the mobile network connection with
nearby devices.
To set up a WLAN hotspot, do as follows:
1. Tap
.
2. Under the Wireless & networks pane, go to More > Tethering & portable hotspot.
3. Enable Portable WLAN hotspot.
4. Tap Set up WLAN hotspot, and then set the network name, security, and password.
5. Tap Save.
4.6 BT
The BT feature allows the radio to exchange files with another BT-enabled device over short distances.
4.6.1 Pairing a BT Device
1.
Enable the BT feature in either of the following ways:
Tap , and then tap BT under the Wireless & networks pane.
To Next Page
