Hytera RD985 - Internal Parts; Installation Guide; Installation Requirements

3
Internal Parts
No.
Part Name
No.
Part Name
1
Baseband Module
4
Exciter Module
2
Front Panel
5
Receiver Module
3
PA Module
Installation Guide
Proper installation can ensure optimum performance and reliability of the repeater. Therefore, be sure to
read the following instructions before installation.
Installation Requirements
 Installation Environment
The repeater must be installed in a dry and well-ventilated place with ambient temperature of
-30℃~+60℃ and relative humidity of less than 95%.
 Installation Location
The repeater can be installed in a rack, bracket, cabinet or on a desk.
 Installation Tools
Tools required for installing the repeater include a cross head screwdriver, a torx screwdriver and a