In the above interface, you can enable or disable the Scan feature. To exit and return to the main menu,
press the knob.
Note: If the “Scan” option is not checked in the CPS by your dealer, you can not enable or disable
the Scan feature via this menu.
Digital Speaker
The Digital Speaker feature allows your repeater to receive audio from a specific slot, or to mute for the
digital channel.
To access this menu:
1. In the home screen, press the Navigation knob to enter the main menu.
2. Rotate this knob to select the "Digital Speaker” option.
3. Press this knob again to access the “Digital Speaker” interface.
In the above interface, you can select a specific slot to receive, or mute the speaker for the digital
channel. To exit and return to the main menu, press the knob.
To Next Page
Loading...
