Hytera SC580 - Page 18

Setting
Description
You can turn off this feature, or set the Pre-event
R
ecord time to
10s
,
20s
,
30s
,
60s
,
or
120s
.
Loop video
With the Loop Video feature enabled, the product will overwrite earliest untagged
videos to save new videos when the storage is full.
Flicker
When the product is used under indoor fluorescent lamp, the LCD touch screen may
have flickers or stripes during video and photo shooting. With this feature enabled,
the product will adjust the flickers or stripes automatically.
You can turn off this feature, or set the frequency to
50 Hz
,
60 Hz
, or
Auto
.
System
Brightness
You can adjust the screen brightness automatically or manually. With
Adaptive
brightness
enabled, the product automatically adjusts the screen brightness
according to the environmental brightness over the light sensor for optimal
experience.
Sleep
If the product remains idle for over the preset sleep time, the screen automatically
goes off to save battery power.
You can set the sleep time to
Never
,
15s
,
30s
,
1min
,
2min
,
5min
,
10min
, or
30min
.
Volume
You can adjust the volume of multimedia or ringtone.
Tone
The product gives
audible alerts
for some operations, such as starting or ending a
recording, taking photos,
or
triggering an alarm.
Language
You can set the displayed language to simplified Chinese, English, or Russian.
Mute mode
With the mute mode enabled, the product gives no
audible
alerts
,
the indicator does
not light, and the screen goes dim to keep the product
unnoticeable
.
Location
You can turn on or off the Location feature, or set the Location mode.

GPS Only: The product uses GPS only for positioning.

BD Only: The product uses BDS only for positioning.

Mix Location: The product uses GPS, BDS, and network for positioning.
Date & time
You can check the date and time.