Hytera VM580D - Individual Call

6.7.3 Requesting or Releasing Floor
Press and hold the
PTT
key to request floor and speak to the microphone; release the
PTT
key to release
the floor.
6.7.4 Ending a Group Call
Tap to end a group call.
6.8 Individual Call
An individual call is a one-to-one half-duplex voice call between two BWCs or a BWC and a line dispatch
station (LDS). In a half-duplex voice call, only one party can speak at the same time; when one party is
speaking, the other party can only listen.
In the contact list, select the contact, and tap
PTT
or press the
PTT
key to initiate a call.
6.8.1 Answering an Individual Call
You can answer an individual call by either the Full Off Air Call Set-Up (FOACSU) mode or the
Off Air Call Set-Up (OACSU) mode.

FOACSU Mode:
Tap or press the
PTT
key to answer an individual call.