Warranty 6
jGun Overview 6
EC Declaration (ISO 11148-6:2012) 7
EC Declaration - ISO 12100:2010(E) 14
Emissions 19
jGun Safety 20
Personal Protective Equipment 20
Air Supply Requirements 20
The New Patented Safety Lever 20
Reaction Arm or HYTORC Washer 21
Reaction Arm and Socket 22
Key Operating Safety Points 25
jGun Setup and Use 26
Setting a Torque Value 26
Changing the Drive Direction 27
Operating the jGun 28
Loosening a Fastener 29
jGun Repair and Maintenance 30
Maintaining Hoses and Fittings 30
Lubricating the Air Motor 30
Calibration 18
jGun® DUAL SPEED Pneumatic Torque Tool 31
Shifting Between Modes 32
Tool Operation 32
Operation with a Socket and Reaction Arm 33
Operation with a HYTORC Washer 33
Filter/Regulator/Lubricator (FRL) Unit Overview 34
FRL Safety 34
Personal Protective Equipment 35
Air Supply Requirements 35
FRL Setup and Use 36
Important FRL Operating Procedures 36
Emptying the Filter Reservoir 36
Adjusting Air Pressure 38
Filling the Lubricator Reservoir 39
Adjusting the Flow 40
Repair and Maintenance 40
Hoses and Fittings 40
Anti-Explosion Static Dissipative Hose 41
TABLE OF CONTENTS
To Next Page
Loading...
Need help?
General
