Hytorc LITHIUM II Series - Bolting with Socket and Reaction Arm; Install Reaction Arm; Install Socket

Initialize Basic Bolting
L10
 Pull and hold the trigger. A message instructs the user to
press any button to start, to keep hands clear of reaction arm.
 Once operator pushes a button the drive will begin to turn.
 If ANGLE or RELEASE has been specified the tool will pause
before finishing each operation.
 Successful operation is indicated with beeper sound, if
enabled, and green status light.
 If no RELEASE has been set the Tool may lock onto the nut;
set Direction Switch to loosen and jog trigger until Tool is free.