19
Leading Innovation in Torque and Tension Since 1968
The World’s Most Trusted Industrial Bolting Systems
Qualied Personnel:
The bolting system may be operated only by trained and experienced personnel for explosion protection.
Conductivity:
Conductivity of the entire system is ensured by several solid metal springs,
- HYTORC Pneumatic Pump JetAIR 12.A connected securely to the hydraulic hose
- HYTORC Hydraulic Twin Hose (diameter 6 mm) connected securely to the tool
Explosion protection is guaranteed if:
The explosion protection is only guaranteed when all springs (pneumatic pump, twin hose
and tool) are attached tightly. When in doubt about the conductivity of the connection, attach
a standard multi-meter between the tool and the end of the ground wire and take a resistivity
measurement.
Ground wire:
Avoid electric-potential differences between plant and tool.Before initial
operation in explosive areas, a ground wire has to be attached between
the HYTORC Pneumatic Pump (No Electric Pump to be used!) and the plant.
The ground wire must be supplied by the operating company.
Final recommendation for explosion protection:
To ensure an effective explosion protection,
it is imperative to comply with the instructions
mentioned above. It is recommended to have the
explosion proof system inspected by a
HYTORC Specialist on a regular basis.
This system should include anti-sparking
sockets and a grounded ange.
c) Equipped with a plastic remote control FBP-A5 art.-No.: 31044774 or FBP-A10 art.-No.: 33150200. Only
this plastic remote control has passed the electric charge and capacity test.
To Next Page
Loading...
