Hytorc Stealth series User Manual

This manual applies to all tool part numbers in the Stealth Product Family. The
complete part number matrix which applies to this manual can be found in Appendix A
and B respecvely. It is recommended the manual is kept up-to-date by checking the
edion and date code at the boom of this page by ulizing the HYTORC website and
downloading a copy of the most recent edion as needed.
HYTORC Corporate Headquarters
333 Route 17 North
Mahwah, NY 07430, USA
Noce: The informaon contained in this document is subject to change without noce. HYTORC
makes no warranty of any kind with regard to this material, including but not limited to, the implied
warranes of merchantability and tness for a parcular purpose. HYTORC shall not be liable for
errors contained herein or for incidental or consequenal damages in connecon with the furnishing,
performance, or use of this material. It is further recomended that the end-user or repair technician
insure they have obtained and are familiar with the latest revision of the manual for the equipment
outlined in this document.
Restricted Rights Legend: Use and duplicaon of the informaon contained within this manual is
limited to the purchaser, end user, or licensed Hytorc representave. It is recommended that proper
training for the equipment outlined in this manual be conducted by a HYTORC authorized training
representave for any person who is operang or repairing the equipment outlined in this document.
Modicaon, or disclosure by any other agency or representave is strictly forbidden.
Product Modicaons: Hytorc Corporaon DOES NOT ALLOW any of the products listed in this manual
to be modied by any end user without excepon. Should an applicaon require a modicaon to the
tool, or any of the standard accessories please consult with your local HYTORC representave and they
will be able to obtain the assistance for any modicaon that may be required.
Copyright © 2015 by HYTORC Division UNEX Corporation. All rights reserved. Reproducon,
adaptaon, or translaon without prior wrien permission is prohibited, except as allowed under the
copyright laws.
6th. Edion. Printed in USA. March 2016
Complies with standards publicaon BS EN 82079-1:2012
STEALTH PRODUCT FAMILY:
STEALTH-2, STEALTH-4, STEALTH-8,
STEALTH-14, STEALTH-22, STEALTH-36
EN, EN-ISO, ISO Standards:
For a complete EC declaraon of conformity
or if you require any further assistance please
contact your local HYTORC representave or
1-800-FOR-HYTORC (1-800-367-4986) or on
the web at www.hytorc.com.
EN 982:2009
EN 61310-2:2008
EN 61310-3:2008
ISO 3744:2011
EN ISO 12100-1:2011
EN ISO 12100-2:2011
EN ISO 14121-1:2007
EN ISO 11148-6:2012

Hytorc Stealth series Specifications

General

Brand	Hytorc
Model	Stealth series
Category	Power Tool
Language	English