STAY SAFE
THANK YOU FOR PURCHASING THIS REVOLUTIONARY TORQUE/TENSION SYSTEM
IMPORTANT READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE
OPERATING CD: Please show the enclosed CD to your staff before each tool use to familiarize them
with the tools.
FREE SAFETY TRAINING: To ensure safe operation, please request the FREE Safety Training before
use by calling your local HYTORC Representative 1-800-367-4986 or www.hytorc.com. We rec-
ommend safety training every 6 months. These trainings are free of charge. Just call us.
PLEASE READ THE SAFETY INSTRUCTIONS HEREIN.
SYSTEM INSPECTION: Before any use, please inspect the entire tool system, including hoses, gauge,
sockets and backup wrenches. Do not use kinked hoses, oversized or heavily worn sockets, backup
wrenches, damaged tools, pumps, connectors, or gauges. Connect system to operate from a safe
distance. Ensure fasteners are in good shape. Verify the tool is functioning with drive or hex ratchet
turning in one direction only and verify the gauge from a safe distance that needle is on zero at no
pressure and at 10,000 psi at high pressure. Keep high pressure on and check system visually for
leaks. Realize that hydraulic tools are very strong and work at high pressure.
HANDS-FREE BOLTING: The tool you have purchased permits hands-free operation from a safe
distance in conjunction with a HYTORC Washer™. We recommend the use of a HYTORC Washer™ to
avoid nger-pinching, over-crowded sites and to ensure hands-free bolting at least on all vertical and
inverted applications, while eliminating improvisation and the use of reaction members or backup
wrenches. Otherwise, set up the tool in a way that it does not have to be held by hand.
For more information, please contact us at 1-800-367-4986 or www.hytorc.com.
HANDS-FREE WASHER APPLICATION: Make sure the drive and the tool are locked on securely.
FREE ANNUAL TOOL INSPECTION: With the purchase of HYTORC, you have the right to a FREE
annual tool inspection, which includes free seals, springs, connectors, and free lubrication. In case
of damaged or worn parts, the rst inspection within 12 months of purchase is free of charge.
Thereafter, you will be informed of any cost prior to replacement. Any part replaced and charged by
us will be sent to you for your inspection upon request when P.O. is issued.
FREE LOANER TOOLS: In case of tool failure during the warranty or rental period, please contact
your local HYTORC Agent for a free loaner tool - 24/7.
HOSE REPLACEMENT: We recommend replacing hydraulic hoses and oil every (3) three months.
PLEASE WEAR REQUIRED SAFETY ATTIRE and use common sense during operation.
HELP: If you require any further assistance, please call your local HYTORC Representative or
1-800-FOR-HYTORC (1-800-367-4986), on the web at www.hytorc.com - 24/7! It’s live!
PLEASE REVIEW THESE SAFETY
TIPS BEFORE EVERY TOOL USE
To Next Page
Loading...
Need help?
General
