To Next PageTo Next PageWhy is the starting motor speed excessively low on my Hyundai 80D-7E Forklifts?
If your Hyundai Forklifts has an excessively low starting motor speed, it could be due to insufficient battery voltage, in which case you should recharge the battery. It could also indicate that the starting motor is defective and needs replacement.
Why does the starting motor pinion keep going in and out on my Hyundai 80D-7E Forklifts?
If the starting motor pinion on your Hyundai Forklifts repeatedly goes in and out, it's likely due to insufficient battery voltage. Try recharging the battery to resolve this issue.
Why doesn't the charge lamp light during normal operation on my Hyundai 80D-7E?
If the charge lamp on your Hyundai Forklifts does not light during normal engine operation, the charge lamp itself may be defective and need replacement. Alternatively, there may be faulty wiring that requires checking and repair.
Why do the lamps flicker during engine operation on my Hyundai 80D-7E?
If the lamps flicker during engine operation on your Hyundai Forklifts, the belt tension is likely improper and needs adjustment.
What causes an irregular fuel feeding sound in Hyundai 80D-7E?
If you hear an irregular fuel feeding sound in your Hyundai Forklifts, the fuel feed pump is likely faulty and needs replacement.
What causes the alternator to make abnormal sounds in Hyundai 80D-7E Forklifts?
If the alternator on your Hyundai Forklifts makes abnormal sounds, it is likely defective and needs to be replaced.
General| Model | 80D-7E |
|---|---|
| Power Type | Diesel |
| Load Capacity | 8000 kg |
| Engine Power | 74 hp |
| Engine Power (kW) | 55 kW |
| Transmission | Automatic |
| Fuel Type | Diesel |
Procedure for daily pre-operation safety checks.
Recommended periodic maintenance program.
Daily safety inspection and refueling procedures.
Safe and efficient operation instructions.
Emergency procedures for starting and towing.
Planned maintenance program details.
Symptoms, causes, and remedies for issues.
Decal on dashboard cover for OPSS system.
Warning label on the front outside of overhead guard stay.
Procedure for daily pre-operation checks.
Guidelines for safe operation and prohibited actions.
Importance and usage of seat belts.
Keeping operator safe within the truck.
Safe practices related to fork operation.
Warning about hazardous pinch points.
Causes and prevention of tip-over incidents.
Proper parking procedures.
Safe procedures for refueling.
General rules for operator safety.
Dangers of carrying loose or unbalanced loads.
Safety precautions when working near electrical lines.
