20 www.i-sens.com www.i-sens.com 21
Setting Up Bluetooth
Step 2 Bluetooth Pairing
When you do not want to connect your meter
to your smartphone, press the ● button when
the screen shows on the right. The meter will go
to Step 4 Year Setting Mode.
1
Press the
▲
or ▼
button. The meter screen
shows OFF, On, and PAIr in turn. To pair your
meter with your smartphone, press the ● button
when the screen shows PAIr.
Note: The symbol will appear
on the screen when the Bluetooth®
feature is on. When the symbol is not
present on the screen, the Bluetooth®
feature is off. When you need to turn
off/on the Bluetooth® feature, press the
● button when OFF/On blinks on the
screen.
2
Step 3 Entering the PIN number
The symbol and 'PIn' will appear if you press
the ● button when the meter screen shows 'PAIr'.
2
Launch SmartLog mobile app to start pairing the meter with
your smartphone. Find the 'Accessories' menu and select the
appropriate meter model on SmartLog mobile app.
1
The meter will display six digit
PIN number.
Look for 'CareSens' and the
last 4 characters of the meter
serial number on the SmartLog
mobile app screen to correctly
identify your meter.
Touch your meter's ID (CareSens
XXXX) on the SmartLog mobile
app screen.
4
3
Blood Glucose Meter
PGUCA-0000102 REV A 2019/09
For in vitro diagnostic use. For self-testing use only.
Use with CareSens N Blood Glucose Test Strip.
Model: GM01BAD
Manufacturer:
i-SENS, Inc.
43, Banpo-daero 28-gil,
Seocho-gu, Seoul 06646, Korea
www.i-sens.com
Customer Service:
1-800-429-5001
9 am–9 pm EST, Mon–Sat
Contains FCC ID: OELBM001
3 V 12 mA (CR2032x2)
Serial
number
To Next Page
Loading...
Need help?
General
