8
Virtual Keyboard your Pocket PC and Bluetooth
The Virtual Keyboard (VKB) is equipped with Bluetooth, a short-ranged
radio communications technology which allows the device to communicate
with your Pocket PC up to 10 meters away without the need for a physical
connection.
As with all Bluetooth devices, to connect with your Pocket PC you will need
to do the following:
Pair/bond your Pocket PC device to the virtual
keyboard…
…open the VKB Driver to set up a connection…
…and connect.
The first time you use your Virtual Keyboard with a Pocket PC device you
will also need to install some software, called a driver, on the Pocket PC
device.
Installing the driver on your Pocket PC Device
1) Insert the VKB CD into a CD-ROM drive on your computer.
2) Open the Microsoft ActiveSync program on your computer.
3) Insert the Bluetooth Virtual Keyboard & User Guide Disk into a
CD-ROM drive on your computer. (The CD should run
automatically however if it does not start by itself, please open
the CD and run setup.exe)
4) Follow the onscreen prompts to arrive at the PDA’s page.
To Next Page
Loading...