Iberital 2 Groups - Water Softener and Display Operation

IBERITAL DE RECAMBIOS, S.A.
1.7.- WATER SOFTENER
The water softener eliminates calcium from the water therefore preventing the build up
of inlays. The water softener degenerates through use and must be regenerated. Regeneration is the
procedure which returns them to the original state. The presence of inlays in the boiler, through lack
of regeneration, will nullify all guarantees in force. (Water softener is not included).
1.8.- DISPLAY OPERATION (OPTIONAL)
OK
button
MENU
button
UP/DOWN
button
ON/OFF
button
The display has two lines of 16 characters.
 Position OFF: When the display is in the OFF position, shows “TIME” and “OFF”.
 Position ON: Push the button I/O and the display will show the boiler temperature ºC, TIME,
and the name recorded.
Display USER’S MENU
: When the general switch is in the position 2 and the display is ON (the
display shows the name recorded), then press the MENU button during 15 seconds and will enter in the
USER’S MENU.
Display TECHNICAL’S MENU
: When the general switch is in the position 2 and the display is OFF
(the display shows OFF ant TIME), then press the MENU button during 15 seconds and will enter in the
TECHNICAL’S MENU.
IMPORTANT: One you are inside any MENU, pressing the MENU button will advance in all the menu
options. Pressing the OK button will confirm the MENU option, and at the same time will confirm any
change.
1.8.1.- DISPLAY USER’S MENU
 Auto ON-OFF weekly program.
When the display shows the word “CLOCK ADJUSTS”, press the button “OK”.
It is very important to adjust DAY / TIME, because this information will be used for the
electronic box in the option of auto ON – OFF WEEKLY PROGRAM.
MANUAL NEW IBERITAL INGLES Página 12 de 30
11/05/2007