IBERITAL DE RECAMBIOS, S.A.
Pre-brew. ON
1 espresso xxxx seg
Pre-brew. OFF
1 espresso xxxx seg
Probe sensitivity
high/mid/low
Service cycles
xxxxxxx
The display will show the “PREBREWING” (pre-infusion) option. Pres buttons t
to DISABLE or ENABLE this option. If you select “ENABLE”, press the MENU button. The
display will show:
The display will show the “PRE-INFUSION ON” time for any dosing selections (1 espresso, 1
coffee, etc.). Press the buttons to select “ON” time (from 0,1 s, . till 5 s., by 0,1 s.).
Press MENU button so select the other options.
Finally, press MENU button to pass to the following option:
The display will show the “PRE-INFUSION OFF” time for any dosing selections (1 espresso, 1
coffee, etc.). Press the buttons to select “OFF” time (from 0,1 se, . till 5 s., by 0,1
s.). Press MENU button so select the other options.
One you have finished this procedure, press the MENU button to pass to the following option:
The display will show “PROBE SENSITIVITY” for the boiler water level. Press
To select low 150 K / mid 400 K / high 1 M .
Once you have finished this procedure, press MENU button to pass to the following option:
Página 19 de 30 MANUAL NEW IBERITALINGLES
11/05/2007
To Next Page
Loading...
