4.2 STORAGE
If the machine is not used for prolonged periods of time, we recommend to store it at a covered location
sheltered from bad weather and aggressive chemicals.
The machine should be stored away with empty tank, clean hoses and circuit. Make sure that the
anti-condensate filter cups and the pressure reducer do not contain any liquid. Wrap the hoses in plastic
sheets to protect them against external agents.
We recommend to remove the nozzle and keep it in a safe place wrapped in pluriball packaging paper.
The machine should be stored indoors at suitable temperature (0°C to 60°C – 32°F to 140°F).
4.3 PACKAGING DISPOSAL
However, follow these general rules:
any packaging materials should be collected separately and brought to special recycling bins;
any metal parts contained in the machine must be removed and sent to a foundry for recycling.
To dispose of packaging materials, comply with the applicable standards in the machine
Country of use.
To Next Page
Loading...