7.1 TECHNICAL INFORMATION TO ENSURE GOOD MAINTENANCE
To ensure effective maintenance:
only use original spare parts;
comply with the (preventive and routine) maintenance schedule prescribed by the manual: the time
recommended between one service and the next is the longest acceptable time. Therefore, it should
not be exceeded but can be shortened;
effective preventive maintenance requires constant machine observation and inspections.
7.2 GENERAL POST-MAINTENANCE TIPS
After carrying out machine maintenance and before restarting the machine, always:
check that any parts that had been replaced and/or the tools used to carry out maintenance
have been removed from the machine;
check that all the guards and protection devices which may have been removed during
maintenance are back in place, in working order and correctly positioned and adjusted;
check that any pneumatic connections disconnected during maintenance have been
reconnected;
check the efficiency of the safety devices.
Only after maintenance completion and after carrying out all the required replacements may
the normal machine operating conditions be restored.
To Next Page
Loading...