5 INSTALLATION
5.1 INSTALLATION AREA TO BE SET UP BY THE USER
Before starting to work the user should make sure that:
there aren’t any unauthorised persons within the selected work setting;
there aren’t any foreign objects hindering the installation work or making it unsafe.
5.2 IBIX ECO-BLASTER PACKAGE OPENING & ASSEMBLY
The machine is delivered to the Customer contained in its special packaging (carton) [1] with
some disassembled parts (lifting handle and filling lid).
Place the box on the floor [2], use a cutter to cut the tape joining the bottom flaps.
Stand up the box again with open flaps and remove the packaging by the special handles
[3].
Release the machine from its preformed wrapping [4].
To Next Page
Loading...