IBIX 25 - MACHINE INSTALLATION

To Next Page

To Previous Page

ECO-BLASTER IBIX 25

5 INSTALLATION

5 INSTALLATION ............................................................................................................... page 26

5.1 Installation area to be set up by the user...................................................................... page 27

5.2 IBIX eco-blaster package opening & assembly ............................................................ page 27

5.3 Warnings and recommendations before starting up ..................................................... page 28

Main Page

Table of Contents2
Foreword5
General Information6
General Information on Machine Use7
General Precautions on Machine Use7
Pictograms Relating to the "Operator Qualification8
Pictograms Relating to Safety8
Applied Standards9
Patents and Trademarks9
Presentation11
General Information12
Data Plate16
Characteristics16
Operating Principle17
Technical Specifications17
Information on the Machine Working Noise17
Air Consumption at Nozzle17
Blasting Materials to Use - Tips and and Suggestions18
Dangers and Protection19
Not Permitted and Not Recommended Uses20
Accident-Preventing Devices21
Lifting, Handling and Storage23
Lifting and Handling24
Storage25
Packaging Disposal25
Installation27
Installation Area to be Set up by the User28
IBIX Eco-Blaster Package Opening & Assembly28
Warnings and Recommendations before Starting up29
Start-Up31
Maintenance35
Technical Information to Ensure Good Maintenance37
General Post-Maintenance Tips37
Routine Maintenance38
Daily Checks38
Weekly Checks39
Replacing the Twin Hose40
Gun Maintenance41
Unscheduled Maintenance42
Troubleshooting43
System Concept (H2O Gun; Helix Gun)45
Ibix H O46
IBIX H O for Conservative Restoration and Urban Recovery46
IBIX with HELIX Gun46
For Industrial Applications46
For Conservative Restoration and Urban Recovery46
IBIX HELIX System47
IBIX General Points47
General Information48
Installation48
Operation49
Faults, Causes and Remedies50
Warnings and Precautions about the Abrasive Hose51
Forword52
Radius of Curvature52
Torsion52
Traction52
Bending52
Abrasive Media52
Instructions about the Position of the Abrasive Hose53
Replacement of the Abrasive Hose54
Conformity Declaration N.493 ABR ORINOCO HP 14X2557

IBIX 25 - MACHINE INSTALLATION

Table of Contents