Function
File Maintenance
Central Site Customizing provides the
ability
to create and maintain, at a central
site, a
library
that contains customizing parameters
for
all the 3174
controllers
in a
network. Central Site Customizing also makes it possible to generate customized
diskettes
for
the network 3174s.
File maintenance
for
central site customizing includes the
ability
to:
• Create and maintain customizing records
for
all 3174
controllers
on a
controller-by-controller
basis
• Select customizing data records
for
generating diskettes on a
controller-by-controller
basis.
Hardware Requirements
Host Support
Central Site Customizing can be performed from all models of the 3174 except
models
81
R,
91
R,
82R,
or
92R.
The Central Site Customizing
Utility
(CSCU)
requires
that
the controller:
• Be offline
• Have a 3278
or
similar
terminal
attached to port 0
•
Have
two
diskette drives
or
one diskette
drive
and one fixed
disk
drive.
No host support is required
for
Central Site Customizing. The
ability
to customize
controllers
is supported, regardless of host protocols.
Central Site Change Management (CSCM)
Central site change management (CSCM)
allows
the user to
electronically
distribute customization parameters
or
microcode
data to Systems Network
Architecture (SNA) 3174
controllers
that are serviced from a central site. CSCM
requires the Central Site Customizing
Utility
to establish and
maintain
the central
site
library
on a 3174 (except Model 81R, 91R,
82R,
or
92R) that has been
designated as the central site controller.
Note:
If
any of the large-
or
medium-cluster
controllers
supporting Central Site
Customizing is configured
for
the
gateway feature,
it
cannot be the central
site controller.
It can, however, be a
network
controller.
Small-cluster
controllers
cannot be central site controllers.
The customization parameters
or
data
are
electronically
distributed by Version 1
Release 2 of NetView Distribution
Manager
installed in the central site MVS/370
or
MVS/XA host. NetView
DM
uses
LU
6.2 support provided in ACF/VTAM Version 3
Release
2,
and defined protocols
for
managing changes and
data
distribution
using
an enhanced Systems Network
Architecture
Distribution Services (SNADS) format.
Customization parameters (the
parameters
contained in the central site
library)
are
distributed
electronically
to an SNA 3174
controller
without
disrupting
normal
workstation operations. Activation of the
electronically
delivered
parameters
will
require an initial microcode load (IML) of the 3174 controller. Electronic
distribution
of
other
data such as patches,
new
microcode
engineering
change
release levels, Request for Price Quotations (RPQs),
or
downstream load (DSL)
device code
may
require
network
site intervention, depending on the 3174 model
or
the choice of
hardware
features in the remote 3174.
Chapter
2.
Features and Functions of the 3174
Controller
2-13